Skip to content
English
  • There are no suggestions because the search field is empty.

Unpacking and Setting Up Your S80 Terminal

Unpacking and Setting Up Your S80 Terminal

This guide covers everything included in the S80 terminal box and provides step-by-step instructions for loading receipt paper and powering on the device for the first time.

What’s Included in the Box

📦 Your S80 Package Contains

Standard Package Contents

  • S80 Device
  • AC Power Adapter
  • AC Power Cable
  • Telephone Cable
  • Thermal Receipt Paper Roll
  • Product Manual

Additional Items (If Integrated With a Computer)

  • Serial Cable for S80
  • Prolific Serial-to-USB Cable

Loading the Receipt Paper

  1. Press the green button on the top right of the device to release and open the receipt paper holder cover.

  2. Lift the cover fully.

  3. Place the thermal paper roll into the compartment with the paper feeding from the bottom, coming out underneath the roll.

  4. Hold the end of the paper with one hand while closing the cover securely with the other.

  5. Hold the terminal with one hand and gently tear off the excess paper by pulling down and to the side.

Powering On the Device for the First Time

  1. Press and hold the red power button located on the top left corner of the keypad until the screen illuminates.

  2. After powering on, the device will automatically connect to BroadPOS to check for available updates . If no updates are found, the terminal will automatically proceed to the main screen .

  3. The main screen will show:

    • "Ready" if the device is connected to a computer

    • "Input Amount" if the terminal is operating in stand-alone mode

How to input letters on PAX S80 

To input letters on Pax S80:  

Press the corresponding number key , then press the ALPHA button (located next to the number 6). For example, to enter the letter B, press #2, then press the ALPHA button two times.